Error Messages - Cissell HF 234 Instruction Manual

Error messages

When one of the following malfunctions occurs during a program, the central
display will communicate the appropriate error message at the end of the cycle.
E3 (Eprom)
The Eprom is wrong, replace it by another.
Remark :
For coin op machines, it is possible that a program number appears on the
right display in combination with E3.
This indicates a wrong price adjustment for this program. A coin value "0"
or bigger than "1000" was programmed.
Example : wrong price adjustment for program 5.
E4 (water level)
The appropriate water level was not reached after 15 minutes.
E5 (Heating)
The wash bath did not reach the required temperature after 80 minutes of heating.
E6 (door lock)
The door lock was released during the wash cycle.
E7 (safety level)
The water was insufficiently drained, the machine did not spin and the water is
possibly still inside the tub.
E8 (temperature sensor)
The temperature sensor is probably broken or malfunctioning.
6
20