Disassembling The Clamp Bracket; Assembling The Clamp Bracket - Yamaha F4B Service Manual

BRKT

Disassembling the clamp bracket

1. Remove the tilt pin a.
2. Remove the self-locking nut b and nut
c.
3. Remove the plate d, clamp bracket
(STBD) e, washers f, swivel bracket
g, collar h, and clamp bracket (PORT)
i.
b
d
c
f
i
4. Remove the plate j, cover k, bushings
l, tilt lock lever m, and spring n.
m
l
l

Assembling the clamp bracket

1. Place the spring a.
2. Install the bushings b, tilt lock lever c,
cover d, and plate e.
9-17
Bracket unit
e
g
f
h
a
k
j
n
c
b
b
3. Hook the sections a of the spring a
onto the tilt lock lever c, and then fit the
section b into the slot in the plate e.
c
a
e
b
a
4. Install the bolts f and g into the clamp
bracket (PORT) h.
5. Install the washers i, swivel bracket j,
collar k, clamp bracket (STBD) l onto
the bolts f and g.
6. Install the plate m, self-locking nut n,
washer o, nut p, and tilt pin q.
7. Tighten the self-locking nut n to the
specified torque.
d
e
a