Security Considerations - Xvico pioneer Operation Instraction

To avoid danger when using 3D printer , please pay attention to precautions
◆
below
!
1. During Operation , the maximum temeprature of nozzle can be 260 ℃ while hotbed can be 100 ℃ . For your
safety , during printing or cooling down , do not touch the nozzle , hotbed and models under printing .
2. During the operation of the machine, it is forbidden to reach into the machine to prevent the injury.
3. Power works at 110V/220V 50HZ AC and supply ground needed . Do not use other power supply , or it may cause
components damage , fire or electric shock .
4. We suggest wering protective goggles when removing auxiliary support materials .
5. Some filaments will emit slight irritant gases , so we suggest to use 3D printer in a ventilated environment .
6. ABS filament will emit a bit toxic gases when it melts .

Security Considerations