Judgment Of The Gap Between Nozzle And Platform - Xvico pioneer Operation Instraction

⚫ click
⚫ click
⚫
is print setting,touch to enter the interface as follows：
1) is print platform temperature,click to set the print platform temperature
2) is extruder temperature，click to set the extruder temperature
3) is printing speed，click to set the pringting speed。
4) is speed of fan，click to set speed of fan
3.

Judgment of the gap between nozzle and platform.

⚫
When the nozzle is too close to the print
platform：
The printed model edge has irregular
projections. It means the gap is too close to
print normally. Sometimes it even cannot
output filament
button can pause to print
button can stop printing