Maintenance Service Regulations - Xvico pioneer Operation Instraction

rotate the motor synchronous wheel in the opposite direction and positive direction. If
the moving distance of extruder before and after is not equal, indicating too loose; you
can also press the middle of the belt, if you gently press the belt arc is very large,
indicating that the belt is too loose; there is a test method is to download cylindrical data,
if one side is flat, it means that the shaft on this side is too loose.

Maintenance Service Regulations

1. This product executes regulations of "Product Warranty Card".
2. Please contact supplier or customer service if the product have any problems . Do not
repair it by yourself, otherwise you need to bear all the consequences.