Technical specifications Product description Foot operated step for mounting outside under the floor of a vehicle. Installation Under the vehicle Floor at the front- middle or rear door Dimensions Step depth 300 mm - width depending on model 600, or 900 mm For detailed dimensions please refer to the installation drawings in the rear of the manual.
13. Repair and maintenance must be done by qualified and trained staff only. 14. If any parts need replacing, ensure only original Acdeos Parts are used. 15. If the anti slip profile on the step becomes worn, the step platform must be replaced.
Operation First read safety instructions This is a mechanical semi-automatic step. You can operate the step by feet. To open the step; simply push with your feet at the center of the step. The step will move in a little and unlock itself.
Exact measurements of the product should be taken from the official installation drawings. Ask Acdeos for the last revision and official installation drawing. Figures and drawings in this manual are only indicative.
Always try to go as vertically as possible straight up from the fixing point on the rear of the step to the fixing points on the vehicles floor. Adjust the step so that it is horizontal under the vehicle. Finally fit all bolts and nuts to complete the mounting of the step.
Using the Step: You should test the step after installation. Follow these instructions: 1. MOUNTING – Check that all mounting bolts are in place and tightened. 2. MOUNTING – Bring the step out and apply a load : Max 150 Kg. Check if the mounting of the step is correct for this weight.
Page 8
Product description Product AXS STEP Mechanical Sliding step Type AXS MD 600 SA / M AXS MD 900 SA / M Production under responsibility of Company Acdeos BV Address Touwbaan 1A City 2352 CZ Leiderdorp Country Netherlands Website WWW.ACDEOS.COM Legal represented by Mr.