Related Manuals for Acdeos AXS – FL
Summary of Contents for Acdeos AXS – FL
- Page 1 AXS – FL Fixed step Installation instruction ACDEOS BV Touwbaan 1A 2352 CZ Leiderdorp Netherlands WWW.ACDEOS.COM Date: August 2017 Rev. V1...
-
Page 2: Technical Specifications
AXS – Fixed Step Manual 1 Technical specifications Product description Fixed step step for mounting outside under the floor of a vehicle. Installation Under the vehicle Floor at the front- middle or rear door Dimensions Step depth 200 mm - width depending on model. For detailed dimensions please refer to the installation drawings Weight depending at model. -
Page 3: Mounting / Installation
Warning: Changing the vehicle chassis affects the strength of the vehicle. This kind of changes is only allowed after approval of the vehicle builder / constructor. You need to consult the vehicle builder for these kinds of changes. Acdeos cannot be made responsible or held accountable for any vehicle / chassis changes. - Page 4 AXS – Fixed Step Manual Drill holes for the bracket Mount the brackets with the enclosed bolts. For Mercedes Vito: The rear bracket must be cut like this. App. 30 mm from the edge. Slide the fixation plates diagonally into the first and last open profiles AXS –FL Fixed Step Manual Vers 2.0...
- Page 5 AXS – Fixed Step Manual Fasten the step platform to the mounting bracket using the plates and the groove in the front profile Mount the carrying arms on the brackets. Put a spirit level on the arm. Press down or lift until the arm is level. Fit the inner bracket.
- Page 6 AXS – Fixed Step Manual Mount the bracket with the enclosed rivet nuts and bolts Fasten all bolts like this. Cut off the excess part of the threaded bar. Finish off with some anti corrosion at the bolts. And you’re done. AXS –FL Fixed Step Manual Vers 2.0...
-
Page 7: Periodic Maintenance
AXS – Fixed Step Manual 5 Maintenance 5.1 Cleaning The step must be cleaned in the normal cleaning schedule of the vehicle, depending on the use of the vehicle and the filthiness of the operation. Normal non-aggressive cleaning materials, as used for cleaning the other parts of the vehicle, should be used.