Parts Supplied - Fisher & Paykel SINGLE DISHDRAWER DD24SCT Series Installation Manual

Drain hose Drain hose
support (1) joiner (1)
Phillips 1 1/2" (38mm)
5/8" (16mm) bottom fixing
screws (7) screws & metal
washers (2)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorized Service Center or our local website listed at the end of this document.
2

PARTS SUPPLIED

Wire clip (1)
(for securing
Drain hose joiner)
Rubber washer Moisture protection
for inlet hose (1) tape (1)
(comes already (to prevent moisture
fitted) damage to cabinetry)
Clamp (1) Side mounting
(for securing bracket kit
Drain hose joiner) (A and B) (2)
OPTIONAL
Top
mounting
brackets (2)
OPTIONAL
2