Operation
1. Oil dipstick
1. Oil dipstick
2. Lower level mark
3. Upper level mark
EMU27151
Engine
Check the engine and engine mounting.
●
Look for loose or damaged fasteners.
●
Check the propeller for damage.
●
Check for oil leaks.
●
EMU36490
Flushing device
Check that flushing device's garden hose
connector is securely screwed on to the fit-
ting on the bottom cowling. NOTICE: If the
flushing device is not properly connect-
ed, cooling water can leak out and the en-
gine can overheat during operation.
[ECM01800]
42
1
ZMU05598
1. Fitting
2. Flushing device
EMU36952
Install cowling
1.
Be sure that a cowling lock lever is re-
leased.
2.
Be sure that the rubber seal is seated all
the way around the engine.
3.
Place the cowling on top of the seal.
4.
Check to be sure the rubber seal fits cor-
rectly all the way around the engine.
5.
Move the lever to lock the cowling as
shown. NOTICE: If the cowling is not
installed correctly, water spray under
the cowling can damage the engine,
or the cowling can blow off at high
speeds.
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
2
[ECM01990]
1
ZMU06172
ZMU06136