Yamaha MU10 Welcome Manual page 10

Connect the TO HOST terminal
of the MU10 to the Modem (or
Printer) port of the computer
with an optional Apple Macin-
tosh peripheral cable (M0197),
then set the HOST SELECT
switch to Mac. Also, set the
MIDI interface clock to 1 MHz.
Connect the TO HOST terminal
of the MU10 to the serial port of
the PC98 computer with an
optional 8-pin MINI DIN to 25-
pin D-SUB cable, then set the
HOST SELECT switch to PC-1.
Connect the TO HOST terminal
of the MU10 to the serial port of
the IBM PC/AT (or compatible)
computer with an optional 8-pin
MINI DIN to 9-pin D-SUB
cable, then set the HOST
SELECT switch to PC-2.
If you use an 8-pin MINI DIN
to 25-pin D-SUB cable, connect
a 25-pin to 9-pin plug adaptor to
the D-SUB end of the cable.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Macintosh
PC98
IBM PC/AT and Compatibles
Setting Up Your MU10
mini DIN 8-pin
mini DIN 8-pin
mini DIN 8-pin
mini DIN 8-pin
Mac
mini DIN 8-pin
PC-1
D-SUB 25-pin
PC-2
D-SUB 9-pin
D-SUB 25-pin D-SUB 9-pin
15