Spark Plug - ALDI Ferrex Ninja User Manual

Maintenance
pushing the cover back and away to release the 2 front clips. (Fig. S1)
3. Open the air filter cover (12) and remove the air filter (35). ( Fig. S2)
4. To loosen debris, gently tap the air filter (35) on a hard surface. If the filter is
excessively dirty, replace with a new filter.
5. Wash the filter in liquid detergent and water. Then allow it to thoroughly air
dry. Do not oil the filter.
6. Re-install the air filter (35). Close the air filter cover (12) and secure the fastener.
CAUTION: Never use fuel or low burning paint solvents to clean
the filter (35). A fire or explosion could result.
CAUTION: Clean the filter (35) in a solution of household detergent
and warm water. Ensure the filter (35) is dry before re fitting.
Replacement air filters are available for purchase from https://help.tools/, or by
calling 1300 889 028.

Spark plug

To ensure the engine is operating correctly, the
spark plug (47) must be properly gapped and free
of carbon deposits. Always check the spark plug
cable is firmly fitted to the top of the spark plug
(47). The spark plug (47) should be changed after
approximately 25 hours of use, or annually.
CAUTION: If the engine (11) has been
running, the muffler (17) will be very hot.
Be careful not to touch the muffler (17).
1. Remove the spark plug cover (13). (Fig. T1)
2. Take out the hexagonal socket + axle (39). Insert
the axle into the hole at the end of the socket to
assemble a spark plug spanner. (Fig. T2)
3. Using the assembled spark plug spanner to
remove the spark plug (47) (Fig. T3 & T4), and
clean any deposits from the spark plug (47) with a
rag or damp cloth.
4. Visually inspect the spark plug (47). Discard the
spark plug (47) if there is apparent wear, or if the insulator is cracked or
chipped.
36
e-mail: info.aldi@positecgroup.com
MODEL No.: SLM531 • 10/2020 • 10093
224cc 4 Stroke Petrol Lawn Mower
T1
T2
AFTER SALES SUPPORT
1300 889 028
(toll free)