Table of Contents
Advertisement
CONTROL BUTTONS/FUNCTIONS
Master Power Button
Power ON\OFF:(The master power switch must be "on")Power to the unit.
1.POWER ON/OFF
Touch the button once (flame will light up) to turn power on for all functions ，keep the last flame color
once appliance off. Touch the button once more to turn all functions off and flame off.
2.FLAME ADJUSTMENT
Touch the button to turn flame on. There are 10 colors in total . Press this button to change color.
The display will show F1(the orange color), F2(the orange and green color), F3(green color), F4 (green
and blue color）F5(blue color), F6(blue and orange color), F7(blue and orange and green color), F8(blue
and red color), F9(red color), F0 (all colors loop) to change the different flame color .
3.CHARCOAL FIRE COLOR/TIMER
①Short press to change the charcoal fire color
Touch the button to turn charcoal fire on. There are 10 colors in total. Press this button to change color.
The display will show C1, C2......C0 (all colors loop) to change the different charcoal fire to same as flame
color.
②Long press to set the timer
Set the timer using the button (1 to 9 hours),long press the button once for 1 hour increments.
4.HEAT SETTINGS
This fireplace consists of a fan forced electric heater with two heat settings: 750W ("LO" shown in
display) and 1500 W ("HI" shown in display). Touch the button once (the icon will light up) to activate
the heater at its low level (750W). Touch the button once more to active the heater at its high level
(1500W). When set in high level, touch the button once again to deactivate the heater.
Note: The fan will continue to run for a short time and turns off automatically after the heater is turned
off.
C
o
n
r t
l o
B
t u
o t
n
s
1
2
3
4
7
Advertisement
Table of Contents
