Table of Contents
Advertisement
Assembly (continued)
I
□
Attach the metal brackets(S) to all three
sides of the firebox and two sides of the
mantel to ensure that your firebox does
not move around as you use it. Insert
and tighten the 2 (PP) screws. Attach the
left and right side trim by inserting and
tightening 2 (PP) screws.
1 spare (PP) screw included.
□
Insert the firebox insert(P) into the mantel from
the rear. Be careful not to scratch the base(B).
□
Viewing from the front check that the insert is centered.
x3
S
PP
11
Advertisement
Table of Contents
