Final Checklist - Fisher & Paykel CI304DTB Installation Manual

TO BE COMPLETED BY THE INSTALLER
Is the cooktop earthed?
Check that there is an adequate and constant flow of cool air from the cabinetry to the
base of the cooktop.
Check that the power supply cable is not accessible via cupboard doors or drawers and
that it is NOT touching the cooktop.
Is the cooktop clamped down securely?
Check that the pan detection feature is working correctly. Turn on each cooking zone
without putting any cookware on them. Are all the displays flashing?
Check that all the cooking zones function correctly. Place suitable pans with water in
them on each zone, then turn all of them on to a high setting. Is the water heating?
Are all touch controls and displays functioning?
Check that the Bridging function works (CI122DBT2 & CI244DBT2 models only). Place a
pan of water in each cooking zones (or one covering both cooking zones). Touch both
control panels simultaneously. Do the bridging zone indicators light up? Is the water
heating?
To check that the 'hot surface' indicators function correctly, turn off all the zones. Is H
displayed in all the cooking zone displays?
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer's Name
Installer's Signature
Installation Company
Installation Date
9
!3

FINAL CHECKLIST

Have you demonstrated the basic operation to the customer?
Make sure you explain to the customer about
1 the importance of taking note of the safety warnings at the beginning of the user
guide, especially for persons with pacemakers or other electrical implants.
2 the 'hot surface' indicators.
3 using induction suitable cookware only.
4 the pan detection feature.
Serial Label can be found either on the
side or bottom of the cooktop chassis