Table of Contents
Advertisement
TO BE COMPLETED BY THE INSTALLER
GENERAL
…
Specified clearance maintained.
…
Unit is level – front to back and side to side.
…
All packaging materials have been removed.
…
Dials turn correctly and freely.
…
Burners light satisfactorily, both individually and with other burners operating.
…
Flame adjustments made if required.
Complete and keep for safe reference:
Model
Serial no.
Purchase date
Purchaser
Dealer address
Installer's name
Installer's signature
Installation company
Installation date
FINAL CHECKLIST
GAS
…
Connection: 1/2 NPT with a minimum 5/8" diameter flex line. Site gas supply is
compatible with cooktop model, and sufficient pressure is available
…
The pressure regulator which is connected to the manifold is set correctly
…
Manual gas shut-off valve installed in an accessible location.
…
Unit tested and free of gas leaks.
ELECTRICAL
…
Receptacle with correctly rated over-current protection is provided for service
cord connection.
…
Adequate ground connection.
13
Advertisement
Table of Contents
