Printer Calibration - IGA ODP 100 User Manual

IGA Manufactures Association
The two top buttons are used to open and close the printer tray.
If discs are manually loaded into the printer, the tray has to be closed by using the
"Close Printer Tray" button. Starting the print without the tray closed, will cause an
error condition.
.
1.4

Printer Calibration

With the installation of the drivers automatically the files "ODP_calprint.prn" and
"ODP_calprint.cdr" are copied to the directory C:\WINNT\SYSTEM32\ .
Both files contain a graphic fort he calibration of the ODP 100.
By printing this graphic onto a CD, the printer calibration can be easily checked.
With the help of the ODP Manager the calibration values Left Margin and Top Margin
can be adjusted by using the arrow key.
The new values have to be stored by pressing the button "Set Margins / Offset".
100 steps alters the print position by 1 mm.
The Tray Offset adjusts the opening distance of the tray and calibrates for a correct
function of the CD clamping mechanism.
100 steps alters the opening distance by 1mm.
The tray is calibrated in the factory and needs to be readjusted only if required due to
technical changes.
10/2004
50
40
Decrease
Top Margin
verringern
30
Decrease
Left Margin
verringern
50 40 30
50 40 30
30
40
50
User Manual ODP 100
50
40
30
100 Steps = 1 mm
100 Schritte = 1mm
30 40 50
30 40 50
Increase
Left Margin
vergrößern
30
Increase
Top Margin
40
vergrößern
50
16