Table of Contents
Advertisement
IGA Manufactures Association
1.3
Software ODP Manager
During the installation of the driver files, the software ‚ODPManager.exe is
automatically copied to the directory: SYSTEM32.
During the driver installation, the program "ODPManager.exe" will be copied into the
directory: SYSTEM32. (C:\WINNT\SYSTEM32\ODPManager.exe).
This software is required to operate the ODP 100 and has to be active all the time
while using the printer.
Because of that a link has to be created to you ‚Autorun' directory, to start the ODP
manager automatically when starting the PC.
Communication status
Store Calibration Values
Program status
After the start of the ODP managers the standard dialog window appears.
In the top left corner, you may see whether your printer is connected to the PC and
can be used.
The OPD manager automatically scans all USB ports to find out which port is
connected to the ODP.
Right next to the COM port indicator appears a little rotating line when the serial
connection is ready.
When this little line does not rotate, you need to check your serial connection.
For possible causes, please look up chapter 'Errors'.
Down left you may see the current values of your printer calibration.
They can be altered with the arrow keys and the button 'Set Margins'.
Find a detailed procedure description in chapter 'Printer Calibration'.
10/2004
Printer status: B=Busy; C=Tray closed/CD in
I=Tray closed; O=Tray out
Print Window Margins
Tray offset
User Manual ODP 100
Open Tray
Close Tray
Ink Level
(? – Before the first print)
Ink Level, when the printer
should stop printing.
Quit ODP Manager
15
Advertisement
Table of Contents
