Cisco EtherSwitch Service Modules Feature Guide
Command or Action
Step 12
copy running-configuration startup-configuration
Example:
Switch: copy running-config startup-config
Step 13
reload
Example:
Switch: reload
Troubleshooting the Cisco EtherSwitch Service Module Software
Purpose
Copies the configuration from the running
configuration file to the switch startup configuration
file.
This procedure is likely to leave your Cisco
•
EtherSwitch service module virtual interface in a
shut down state.
You can see which interface is in this state by
•
entering the show running-configuration
privileged EXEC command.
To reenable the interface, enter the interface vlan
•
vlan-id global configuration command, and
specify the VLAN ID of the shut down interface.
With the Cisco EtherSwitch service module in
interface configuration mode, enter the no
shutdown command.
Reloads the switch stack.
Cisco IOS Release 12.2(25)SEC
75