Cisco NME-16ES-1G Features Manual page 73

Cisco EtherSwitch Service Modules Feature Guide
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
DETAILED STEPS
Command or Action
Step 1
service-module interface slot/port session
Example:
Router# service-module gigabitethernet1/0 session
Step 2
dir flash:
Example:
rommon> dir flash:
Step 3
service-module interface slot/port password-reset
Example:
Router# service-module gigabitethernet1/0
password-reset
Step 4
flash_init
Example:
Switch: flash_init
Step 5
load_helper filesystem:/file-url ...
Example:
Switch: load_helper flash:xyz
service-module interface slot/port session
dir flash:
service-module interface slot/port password-reset
flash_init
(Optional) load_helper filesystem:/file-url ...
rename
boot
copy flash:
configure terminal
enable secret password
exit
copy running-configuration startup-configuration
reload
Troubleshooting the Cisco EtherSwitch Service Module Software
Purpose
Connects to the service module and opens a Cisco
EtherSwitch service module session.
Displays a list of all files and directories in flash
memory on the service module.
Enables password recovery.
Initializes the flash memory file system.
Loads and initializes one or more helper images.
Cisco IOS Release 12.2(25)SEC
73