Cisco NME-16ES-1G Features Manual page 56

How to Configure the Cisco EtherSwitch Service Module in a Switch Stack
DETAILED STEPS
Use the show platform stack-manager command to display platform-dependent switch-stack
Step 1
information. Use the show platform stack-manager all command to display all information for the
entire switch stack, for example:
Switch# show platform stack-manager all
Current
Switch#
--------------------------------------------------------
*1
2
Switch#
--------------------------------------------------------
1
2
==============================================================
Switch
Number
--------------------------------------------------------------------
1
2
==============================================================
Switch
Number
---------------------------------------------------------------------
1
2
Last Conflict Parameters
Switch
Number
To display information about a stack member or the switch stack, use the following commands:
Step 2
•
•
Cisco IOS Release 12.2(25)SEC
56
Role Mac Address
Master 0000.0090.3080
Slave 000f.8f4e.2900
Stack Port Status
Port 1 Port 2
Ok Ok
Ok Ok
Stack Discovery Protocol View
Active Role Current
State
TRUE Master Ready
TRUE Slave Ready
Stack State Machine View
Master/ Mac Address
Slave
Master 0000.0090.3080
Slave 000f.8f4e.2900
Master/ Prio
Slave
Use the show switch command to display information related to the stack member or the switch
stack.
Switch(config)# show switch 6
Current
Switch# Role Mac Address Priority State
--------------------------------------------------------
6 Slave 0003.e31a.1e00
Use the show switch neighbors user EXEC command to display detailed information about the
neighbors of a switch stack:
Priority State
1 Ready
1 Ready
Neighbors
Port 1 Port 2
2 2
1 1
Sequence Dirty
Number Bit
176 FALSE
177 FALSE
Version
(maj.min)
1.9
1.9
Default Image Uptime
Config Type
1 Ready
Cisco EtherSwitch Service Modules Feature Guide
Uptime Current
State
1344 Ready
1338 Ready
Mac Address