Table 18: Dms-100 Switch Capacity; Table 19: Dms-100 Switch Statistics Provided By Nortel - Cisco NORTEL SL-100 Supplement Manual

DMS-100 CompuCALL Interface Specification (Q218)
TotalBytesPC
ByteToBit
Occu
X.25 link (e.g. 60%).
Formula 2:
BandWidth (bit/sec) = CallsPS * TotalBytesPC * ByteToBit * Occu
Where: CallsPS - average calls per second (call/sec).

Table 18: DMS-100 Switch Capacity

Parameter Maximum
Value
SN 96
max
SVC 8
max
ACDDN 20
max
DN 20000
max
LinkBD 19.2 (kbps)
AcSVC 96
max
Cus 81
max
Note: Nortel recommends only one SVC per CompuCALL link.

Table 19: DMS-100 Switch Statistics Provided by Nortel

Parameter Maximum
Value
CSL 5
sta
MSL 20
sta
BM 90
sta
- total bytes per call (byte/call),
- bits in one byte (= 8),
- planed CompuCALL message occupancy of
Meaning
Maximum active CompuCALL sessions
per switch
Maximum SVCs per CompuCALL
session
Maximum ACD Groups associated to
one CompuCALL session
Maximum non-ACD DNs associated to
one CompuCALL session
CompuCALL link bandwidth (kbits/sec)
Maximum active SVCs per DMS-100
switch
Maximum customer number per DMS-
100 switch
Meaning
Statistically estimated maximum calls per
second on one active CompuCALL link
(Calls/Sec/Link).
Statistically estimated maximum
messages per second on one active
CompuCALL link (Messages/Sec/Link).
Statistically estimated average bytes per
CompuCALL messages (Bytes/Message).
47
47
47