Table of Contents
Advertisement
Note the T20, T21, T22 and T23 in the Eicon WAN Service configuration
usually match the corresponding ones in the DMS100 datafill MPCLINK
table.
a. In the Advanced Tab
b. Max retry count N3 3
c. Data link layer HDLC
5.
Select the HDLC node. Enter the following values:
a. Check the box entitled FRMR to RRC/RNRC/REJC with P=0
b. Leave the Disable Automatic DTE/DCE Settings for Dialup
Link box unchecked
Max Size Frame N1 (octets)
Window K
In the Advanced Tab, the values displayed should be the following:
Link Setup
Sequence
Max retry count (N2)
Check Point T1
Ack Delay T2
Idle Probe T3
HDLC X.32 Service Sel.
Leave GOSIP box unchecked
6.
Select the Direct node. Enter the following values:
R1(on) -> DTR(on) delay
DSR(on)->RTS(on) delay
DSR de-bouncing delay
Max delays for a connection establish.
7.
Select the Sync icon. Enter the following values:
Line interface
Duplex
Type
Modem interface
Clocking
Data encoding
Eicon Card Configuration Details
53
144
7
Active
Normal
10
5000
1200
25000
NONE
0
0
100
15
Leased
Full
Point-to-Point
V35/RS232
External
NRZ
53
53
Advertisement
Table of Contents
