Sms Notifications; Starting Up The Modem - CheckMK Rail2 Mark I Manual

Check_MK rail2 Mark I - Manual 50 / 57
13. SMS notifications
It is possible to attach a GSM modem to the device in order to have SMS notifications sent over it by
Check_MK (in the event of critical problems for example).
The GSM modem CEP CT63 GSM USB/serial and the UMTS /GSM modem CEP CEP HT63 e are currently
supported. You can either order these together with your appliance or purchase them from us later as
accessories.

13.1 Starting up the modem

In order to put the modem into operation, you must insert a functioning SIM card, attach the modem to
a free USB connector on your appliance using the enclosed USB cable and connect the modem to the
mains using the enclosed power adapter.
As soon as this has been done, the device will automatically detect the modem and set it up. Open the
web interface of the device and select the module SMS administration. The current state of the modem
as well as the connection with the mobile phone network will be displayed on this page.
If you need to enter a PIN to use your SIM card, you can specify this PIN under SMS settings.
©Copyright Mathias Kettner GmbH 2018 mathias-kettner.de