Table of Contents
Advertisement
Check_MK rail2 Mark I - Manual
26 / 57
9. Device control
Procedures such as starting, restarting or shutting down the device all come under device control. You
can give these commands in different ways.
9.1 Restarting / Shutting down
You can restart or shut down the device over both the web interface and the console.
In the web interface you will find the menu items Restart device and Shut down device under the point
Control device in the main menu. The device will execute the action immediately after the command
has been selected.
In the console, you can get to the device control menu by pressing <F2>.
©Copyright Mathias Kettner GmbH 2018
mathias-kettner.de
Advertisement
Table of Contents
Need help?
Do you have a question about the Rail2 Mark I and is the answer not in the manual?