Check_MK rack4 Mark III - Quick start 1 / 4 1. Quick start guide • Unpack the device and first of all check that your shipment is complete. • Plug in the device. When installing for the first time, you should ensure the following connections as a minimum: –...
Check_MK rack4 Mark III - Quick start 2 / 4 2. Shipment The following are included with your Checkmk rack4 Mark III: • Checkmk rack4 Mark III appliance – Two internal power supply units – Two SSDs in a caddy (960 GB) –...
Check_MK rack4 Mark III - Quick start 3 / 4 3. Appendices .1 CE declaration of conformity Mathias Kettner GmbH declares that the device described in this document is in accordance with the essential requirements and other relevant provisions of the directive 1999/5/EC.
Check_MK rack4 Mark III - Quick start 4 / 4 You can get the source codes for the open source components mentioned and any adjustments created by us in the download center of your subscription (excludes Debian 7). You can get the source codes for Debian 7 either at the address specified in the table or through us at a fee.
Need help?
Do you have a question about the rack4 Mark III and is the answer not in the manual?
Questions and answers