Install Remaining Screws (10-24 X 1/2") Into The Front Of Head To The Cart (Fig.14) - Fisher & Paykel 71131 Installation Instructions And User Manual

INSTALLATION
SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)
C. Position tabs on side bracket to fit into slots on the cart (be aware of
pinch points)(Fig. 44-45). When complete, the landing ledge should
sit flush on the top of the cart (no gap)(Fig. 46).
D. Secure the head to rear of cart (Fig. 47) with (2) Phillips-head screws
provided (10-24 x 1/2").
E. Install remaining (3) screws (10-24 x 1/2") into the front of head to
the cart (Fig. 48).
Fig. 45
Fig. 47
PINCH POINT
15
Fig. 44
Fig. 46
Fig. 48