Components Required - Fisher & Paykel 7 Series Installation Manual

Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
z
contact the dealer or retailer you bought the product from to report the damage.
Fisher & Paykel is not responsible for shipping damage.
z
Supplied
RANGEHOOD EXTERNAL BLOWER
HB1200E Models
INSTALLATION GUIDE
NZ AU
External Blower (1) Technical content (1)
150mm Internal diameter 200mm diameter Flexible
500mm PVC roof pipe (1) ducting 6m (1)
Not supplied
Roof seal kit Aluminium tape
(DO NOT use duct tape)

COMPONENTS REQUIRED

PARTS
Back draft damper 150 – 200mm Duct
assembly (1) connection adapter (1)
12mm Plastic self-tapping 12mm Sheet metal screws
screws (4) (4)
Support straps/brackets Zip ties and sealant
for PVC roof pipe
COMPATIBLE RANGEHOODS
Your external blower must be installed with a compatible rangehood. Refer to the range
hood installation guide. A list of external blower compatible rangehoods can be found at
fisherpaykel.com.
3