Table of Contents
Advertisement
Press the UP button to move to the next setpoint or scroll to EXIT LVD1
and press MENU.
7.8
Ringer
The ringer menu allows you to adjust the ringer setpoints. An "Admin" login
is required to enable or adjust any values. If a ringer is not present in the
system, the RINGER menu will not be visible. In the event of a failure of
ringer A the ringer will automatically switch to ringer B. The ringer option is
only available in 48V systems.
This menu can be accessed by pressing the MENU button at the CONFIG
RINGER menu. The first setpoint displayed will be RINGER A ON. Press
the UP button to continue scrolling thru the RINGER menu. The menu will
circle back to RINGER A ON once the end has been reached.
To exit this menu press the UP button until EXIT RINGER is displayed on the
screen, and press MENU to exit. This will take you back to the configuration
menu. Continue to the next menu for adjustment or follow the exit
instructions at the beginning of this section to exit.
Ringer
Ringer AC Voltage
Ringer DC Voltage
Ringer Frequency
7.8.1 Ringer A (RINGER A)
RINGER A ON is the current state of ringer A, either on or off.
To turn off ringer A, scroll to RINGER A ON, press the MENU button, and
the screen will change to RINGER A OFF. This will cause ringer B to turn
on automatically. Press the MENU button again to turn ringer A back on.
Press the UP button to move to the next setpoint or scroll to EXIT
RINGER and press MENU.
7.8.2 Ringer B (RINGER B)
RINGER B ON is the current state of ringer B, either on or off.
To turn off ringer B, scroll to RINGER B ON, press the MENU button, and
the screen will change to RINGER B OFF. This will cause ringer A to turn
on automatically. Press the MENU button again to turn ringer B back on.
Page 29 of 47
DO600000191
12V (Volts)
n/a
n/a
n/a
Table 9 - Ringer value ranges
24V (Volts)
48V (Volts)
n/a
70.00 - 100.00
n/a
0.00 - 56.00
n/a
17 - 50 (Hz)
Version 2.0
November, 2006
Advertisement
Table of Contents
