Table of Contents
Advertisement
5 Controller Login
The following is a step by step process for logging into the controller as an
administrator. All setpoints and features require login to change values or enable
features. Tests such as battery discharge test, boost test, and lamp test do not
require logging in to execute, provided the feature has been enabled. Default
password is 5001.
1. With display showing "System OK", press and hold MENU button for 5
seconds. Release MENU button when Welcome screen appears.
2. Press the UP button to scroll to CHOOSE: >LOGIN and press MENU.
Display shows PASSWORD ->0000<-, and first 0 flashes.
3. Press MENU to change first digit to desired value. Each press of the
MENU button advances by one. Pressing UP selects that value for the
first digit, which stops flashing, and advances to the second digit,
which will begin to flash.
4. Repeat procedure above for all four digits.
5. Press UP to select <, which will then flash, and press MENU to enter
the password.
6. Controller displays OK: ADMIN for 5 seconds.
6 Presets
Once you have logged into the controller, you can set all controller values to one
of three preset values by selecting either PRESET A, PRESET B, or PRESET C.
This can be done by pressing the UP button to scroll to CHOOSE: PRESET and
press the MENU button. This will enter the preset submenu. Press the UP
button to scroll to the appropriate preset value, and press the MENU button, and
hold it for about 5 seconds. The controller will exit out to the previous menu,
indicating that the preset values have been set. All presets are the same and are
the default values.
EXIT INSTRUCTIONS: Press the UP button to scroll to CHOOSE: EXIT and
press the MENU button. This will return you to the SYSTEM OK menu.
7 Controller Configuration Menu
Once you have logged into the controller, you can make adjustments to any of
the following setpoints by pressing the UP button to scroll to CHOOSE: CONFIG
and pressing the MENU button. This will enter the configuration submenu list.
The configuration menu can be navigated by pressing the UP button to scroll
through all the menu choices.
EXIT INSTRUCTIONS: You can exit and logout of the configuration menu by
pressing the UP button to scroll to the end of the menu string and pressing the
MENU button at the BACK TO MAIN screen. This will send you back to the main
menu. All changes require logging out to take effect. Press UP button to scroll
Page 13 of 47
DO600000191
Version 2.0
November, 2006
Advertisement
Table of Contents
