Ol-9167-01 Rev. A0; Safety - Cisco SFS 7000P Hardware Installation Manual

Safety

Warning

Safety

Warning
Warning
Warning
Warning
Cisco SFS 7000P Hardware Installation Guide
2-2
During this procedure, wear grounding wrist straps to avoid ESD damage to the
card. Do not directly touch the backplane with your hand or any metal tool, or
you could shock yourself. Statement 93
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment. Statement 1030
This unit is intended for installation in restricted access areas. A restricted
access area can be accessed only through the use of a special tool, lock and
key, or other means of security. Statement 1017
Before you install, operate, or service the system, read the Site Preparation and
Safety Guide. This guide contains important safety information you should know
before working with the system. Statement 200
Voltages that present a shock hazard can exist on inline power circuits if
interconnections are made by using uninsulated exposed metal contacts,
conductors, or terminals. Avoid using such interconnection methods unless the
exposed metal parts are in a restricted access location and users and service
people who are authorized to access the location are made aware of the hazard.
A restricted access area can be accessed only through the use of a special tool,
lock and key, or other means of security.
Chapter 2 Installing the Cisco SFS 7000P Switch

OL-9167-01 Rev. A0