Table of Contents
Advertisement
Connecting Network Devices
Connecting InfiniBand Devices
Figure 2-8
InfiniBand and Management Port Connections
Step 1
Cisco SFS 7000P Hardware Installation Guide
2-12
Switch card—4x 10 Gbps InfiniBand connectors
•
If you are using InfiniBand to connect to other workstations or switches, you will
need standard 4x InfiniBand cables. InfiniBand cables can be used to connect any
two InfiniBand devices, whether a switch or a host (see
InfiniBand port
connectors
To connect InfiniBand devices, follow these steps:
Connect InfiniBand cables from the host to the InfiniBand switch.
To connect in an InfiniBand cable, push the connector into the interface until
a.
you hear or feel a click. See
See
Figure 2-10
for an IB cable with a pull connector.
Chapter 2
Installing the Cisco SFS 7000P Switch
Figure 2-9
for an IB cable with a pinch connector.
Figure
2-8).
Serial
console
port
Ethernet
management
port
OL-9167-01 Rev. A0
Advertisement
Table of Contents
