INSTALLATION INSTRUCTIONS — REFRIGERATOR
8. Top adjustment of the cabinet doors
Height adjustment of the cabinet door
Turn the height adjustment nuts (A) with a hex key.
1
We recommend to use a T-handle hex key so that the height adjustment nuts can be
●
turned easily without being blocked by the magnet sensor.
If the height adjustment nuts cannot be adjusted, check the left and right clearances of
●
the top hanging bracket.
Side adjustment of the door panel
Loosen the side adjustment nuts (B) and move the door panel slightly sideways to
2
adjust the side alignment.
We recommend to use socket spanner to loose or tighten the nuts N so that it can be
●
turned easily without being blocked by the magnet sensor and cabinet door.
Depth adjustment of the door panel
Loosen the depth adjustment nuts (C) and move the door panel forward/backward to
3
adjust the depth position.
Tighten the nuts fully after you are satisfied with the adjustments.
4
Adjusting top of cabinet door
We recommend to use a socket spanner to loose
or tighten the nut (A) in case of interference.
A
B
Socket spanner
C
21