INSTALLATION INSTRUCTIONS — REFRIGERATOR
1. Preparations before installation
Door hinge
1
This model is right-hand hinged, with a left-hand door opening. If required, you can
change this model to left-hand hinged and right-hand door opening.
To do this, use a flat-head screwdriver to remove the covers to the left and right of
●
the control panel.
Lever the left and right hand covers from the outer edge (A) as levering from the
●
inner edge may cause damage the to the trim and the control panel.
Lever the hinge cover from the inner edge (B).
●
A
Left hand cover
Remove the upper and lower hinges (C)
●
and refit them to the opposite side.
12
Control panel
Right hand cover
B
Hinge cover
C
A