Fisher & Paykel DISHDRAWER DD60DI9 Quick Start Manual page 2

DURING AND AFTER THE WASH
During the wash the button on the dishwasher door will be illuminated.
At the end of the wash the dishwasher will beep six times and the button will stop being illuminated.
You may notice the following noises at the end of the wash. These are all part of normal operation:
Both drawers may be draining simultaneously.
●
The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened.
●
The fan assists with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes within a few hours after a wash program has finished.
DOS AND DON'TS OF LOADING
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
A neatly arranged load with evenly
spaced dishes helps wash performance.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
Ensure that water reaches all
items on the racks.
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
OPTION RINSE AID
What Regulates the amount
does of rinse aid dispensed.
Reduce this setting if
it do?
there is excess foam after
a wash. Increase this
setting if dishes are wet
or streaky after a wash.
How to change the setting of an option
1 CHECK
Check that there is no wash underway, then open the drawer.
2 ENTER MENU
To enter the menu: Press and hold the
You are now in the Rinse aid option of the preference options menu.
●
To change the Rinse aid setting, go to step 4 now.
●
3 SCROLL TO OPTION
Protruding items will stop the
Press
internal lid of the dishwasher from
When you have scrolled to the end of the sequence, the menu will start again with Rinse aid.
sealing properly, which could result
4 CHANGE SETTING
in a service call.
Press
The wash program indicators will display which setting is selected (see table below).
5 SAVE SETTING & QUIT MENU
Press to save the new setting and quit the preference options menu.
Double models only:
You can use either drawer to change the settings. Changing the settings in one tub will set your preferences for the whole dishwasher.
OPTION
Overcrowding reduces wash
Which option
performance.
am I in?
Possible
settings
Example
If plates and cutlery are nesting,
they are less likely to be cleaned
well.
For detailed information on the
features of your dishwasher
For warranty information
If you...
have any questions or comments
●
need a Fisher & Paykel authorized
●
Dishware is blocking water from
technician to service your product
reaching items on the racks.
need replacement parts or accessories
●
want to register your product
●
PREFERENCE OPTIONS
OPEN DRAWER
WATER SOFTENER AUTO POWER-ON
(SOME MODELS ONLY) (SUITABLE AS A
SABBATH OPTION)
Refer to the 'Water Your dishwasher
softener' section of is factory-set to
the 'User guide' for automatically power
details. on for 30 seconds
whenever you open
the drawer.
You can turn this
setting off.
and together for four seconds.
to scroll to the next option. The wash modifier indicators will display which option is selected (see table below).
to change the setting within an option.
WATER SOFTENER
RINSE AID
(SOME MODELS ONLY)
0 to 5 (max) 0 to 5 (max)
4 indicators lit = setting 4
1 indicator lit = setting 1
FOR MORE INFORMATION
see your 'User guide'
see your 'Service and warranty' booklet
see your 'Service and warranty' booklet
or contact us via our website:
www.fisherpaykel.com
CLOSED DRAWER
TURN TONES OFF
AUTOLOCK
This turns all When this setting is on,
tones off except the drawer will automatically
for fault alerts. lock 30 seconds after it's
closed.
It can then be unlocked
by knocking once on the
dishwasher door. Useful in
boats or motor homes.
OPEN DRAWER
AUTO POWER-ON TONES AT END CLOSED DRAWER
OF WASH AUTOLOCK
(SUITABLE AS A
SABBATH OPTION)
On or Off On or Off On or Off
On
Off
591379 A 08.17