Cleaning And Maintenance Instructions; Cleaning Instructions; [A] Cleaning Procedure - Hoshizaki KML-600MAH Instruction Manual

Modular crescent cuber
Hide thumbs Also See for KML-600MAH:
Table of Contents

Advertisement

III. CLEANING AND MAINTENANCE INSTRUCTIONS
1. CLEANING
1. HOSHIZAKI recommends cleaning this unit at least once a year. More
frequent cleaning, however, may be required in some existing water
conditions.
2. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
3. Always wear liquid-proof gloves for safe handling of the cleaning and
sanitizing solution. This will prevent irritation in case the solution contacts
with skin.

[a] CLEANING PROCEDURE

1) Dilute approximately 13.5 fl. oz. of recommended cleaner Hoshizaki "Scale Away" or
"LIME-A-WAY," (Economics Laboratory, Inc.) with 2.5 gal. of water.
2) Remove all ice from the Evaporator and the Storage Bin.
Note: To remove cubes on the Evaporator, turn off the power supply and turn it on after
3 minutes. The defrost cycle starts and the cubes will be removed from the
Evaporator.
3) Turn off the power supply.
4) Remove the Front Panel.
5) Place the Control Switch in the "SERVICE" position. Then place the Service Switch in
the "DRAIN" position.
6) Replace the Front Panel and turn on the power supply for 2 minutes.
7) Turn off the power supply.
8) Remove the Front Panel and then remove the Insulation Panel by lifting up the panel
slightly and pulling it toward you.
9) Pour the cleaning solution into the Water Tank.
WARNING
24

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kml-600mrhKml-600mwh

Table of Contents