Table of Contents
Advertisement
Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be
installed in a column and the column must be firmly fixed to the wall with commercially available brackets.
Lower Trim Kit
The Lower Trim kit shown is available to order separately from fisherpaykel.com.
To install the trim kit, refer to the instructions which accompany it.
IMPORTANT!
All installation or maintenance operations must be performed with the appliance disconnected
●
from the mains electricity supply.
Kitchen furniture in direct contact with the appliance must be heat resistant 149°F min (65°C min).
●
To guarantee correct ventilation, leave a gap at the bottom of the cabinet
●
(see measurements below).
M
k
SIDE
n
8 |
COFFEE MAKER INSTALLATION GUIDE
6B
CABINETRY DIMENSIONS (18 7/8" (480mm) CAVITY TRIM KIT)
L
o
Lower
Trim kit
J
I
Electrical supply
TOP
CABINETRY DIMENSIONS
Minimum inside width of cavity
I
Overall width of cabinetry
J
Minimum inside height of cavity
K
Overall height of cabinetry
L
Minimum inside depth of cavity
M
Ventilation air vent
n
Height of trim kit
o
5/8–13/16"
PROUD INSTALL
(16–20mm)
13/16"
(20mm)
5/8–13/16"
FLUSH INSTALL
(16–20mm)
13/16"
(20mm)
min 1/16" (2mm)
EB24 MODELS
inches (mm)
22 1/16" (560)
23 5/8" (600)
18 1/2" (470)
18 7/8" (480)
21 7/16" (545)
13/16" (20)
2" (50)
Advertisement
Table of Contents
