Advertisement
If a burner does not light
Turn the control dial to O (OFF) and wait at least 1 minute before trying again. This
is to allow the gas to disperse. If after trying again the burner still does not light, check
that:
the cooktop is plugged in and the power supply is switched on
●
there is no power failure in your home or neighborhood
●
the gas is turned on
●
the gas bottle is not empty (if you use bottled gas)
●
the ignitors are sparking. If they are not sparking, they may be dirty or wet. Clean them
●
with a toothbrush and methylated spirits, as shown in below. See 'Care and cleaning' for
instructions on removing and replacing the burner parts.
Ignitor
If the flame is irregular
Check that the burner parts (flame spreader and burner cap) are:
clean and dry
●
positioned correctly, as shown below.
●
For further advice, see sections 'Care and cleaning' and 'Troubleshooting'.
●
Ignitor
Burner parts
16
USING YOUR COOKTOP
Burner cap
Flame spreader
Flame failure probe
Cleaning the ignitor and probe
Correct assembly
of burner parts
Incorrect assembly of
burner parts, resulting in
irregular flames
Advertisement
