Before placing food in the fresh food or freezer compartments
Remove all internal packaging. Ensure that all transit clips are removed from the
●
●
refrigerator. These are small rubber stoppers located at the back of the shelves.
Clean the inside of the appliance with a mix of warm water and a small amount of
●
●
liquid detergent, and a soft cloth to remove manufacturing and transportation dust.
Allow the refrigerator and freezer to run empty for 2 – 3 hours to allow each
●
●
compartment to cool to the appropriate temperature.
The appliance may have an odour on its initial operation, but this will go when the
●
●
refrigerator and freezer have cooled sufficiently.
Energy efficiency
For the most energy efficient use of your appliance:
Ensure your refrigerator has adequate ventilation.
●
●
Do not cover your appliance with any material that will prevent air from flowing
●
●
around the cabinet sides.
Ensure you vacuum around the appliance to remove dust and possible pet hair
●
●
accumulation. Also keep the appliance and it's cabinetry free of dust by wiping
down with a dry, lint-free cloth (refer to sections 'Cleaning care instructions',
'Cabinet surround' for your specific model).
Allow good clearances in front of air ducts within the cabinet for maximum cold
●
●
air distribution.
Cool hot foods before placing them in the appliance.
●
●
Do not overfill the compartments.
●
●
Keep door openings to a minimum.
●
●
Select a temperature setting that isn't too cold.
●
●
Check your door seals for leaks.
●
●
12
INSTALLATION INSTRUCTIONS