Table of Contents
Advertisement
Installation
Your Fisher & Paykel refrigerator is fitted with front and rear rollers,
designed for moving the product in the forwards and backwards direction.
Avoid moving the product in a sideways direction as this may damage
the rollers or the floor covering/surface.
Your refrigerator will arrive with the front feet
1
wound up making moving the product into its
final location a simple task.
Roll the refrigerator into its final position
2
making sure there is the correct air gap
between the product and surrounding
cabinetry. See minimum clearance in cabinetry
dimensions table.
Adjust the front feet down until the
3
refrigerator is leaning backward with the front
approximately 10mm higher than the back.
This will ensure a good door closing action.
Aligning your refrigerator with cabinetry.
4
a
Align the sides of the refrigerator with
the cabinetry by adjusting the hinge side
front foot.
b
Adjust the handle side foot until it touches
the floor and takes a small amount
of weight.
c
Once the refrigerator is in place and
aligned with cupboards/alcove gently push
on the front top and check if the product
is rocking or stable.
10
INSTALLATION INSTRUCTIONS
Lower the front
of the refrigerator
Refrigerator feet
Raise the front of
the refrigerator
Advertisement
Table of Contents
