Flex Frame Assembly
g337283
1.
Machine assembly
Removing the Flex Frame Assembly
Greensmaster
®
eFlex 1021
20248SL Rev C
2.
Socket head screws (4 each)
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Remove the cutting unit from the machine; refer to Operator's Manual.
4. Remove the four socket head screws (2) that secures the flex frame
assembly (2) to the machine assembly (1).
5. Slide and remove the flex frame assembly (2) from the machine assembly (1).
Figure 94
FF
Disconnecting and Connecting the
5–3).
Page 6–27
Controls, Wheels, and Accessories : Service and Repairs
3.
Flex frame assembly
position, park the
ISENGAGE
, and remove the key; refer to