How To Remove Panels; Location - Hoshizaki KM-500MAH Instruction Manual

2. HOW TO REMOVE PANELS - See Fig. 1
a) Front Panel ......... Remove the screw.
b) Top Panel ............ Lift up slightly its front, push away,
c) Side Panel (R) ..... Remove the screw.
d) Insulation Panel ... Lift up slightly, and pull toward you.
e) Base Cover ......... Lift up slightly, and pull toward you.

3. LOCATION

This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F;
temperature should be within +45°F to +90°F. Operation of the icemaker, for
extended periods, outside of these normal temperature ranges may affect
production capacity.
For best operating results:
• Icemaker should not be located next to ovens, grills or other high heat producing equipment.
• Location should provide a firm and level foundation for the equipment.
• Allow 6" clearance at rear, sides and top for proper air circulation and ease of maintenance
and/or service should they be required.
Lift up and pull toward you.
and then lift off.
Pull slightly toward you, and lift off.
WARNING
Normal operating water
11
Fig. 1