Table of Contents
Advertisement
Getting Started
The camera and monitor need to be paired
the first time you are using your Vision S
Camera System.
NOTE:
Ensure both the camera and monitor
has power
suppl
ied during pairing and
setting processes.
(The vehicle may need to be
running.)
Activate the Monitor
In off mode, press the
(!)
button on the right
of the monitor to turn on the monitor. In on
mode, press and hold the
(!)
button to activate
the monitor.
There are four options that allow you to set
the wireless vehicle rear observation system
before operating.
Pairing the Camera and Monitor
1. Use
.A.
or
'Y
button to highlight
PAIRING
menu, then press
(!)
to enter the next
page.
2. Press the
"MONITOR
PAIRING"'
button at
the bottom of selected camera to pair.
Monitor
Pa.ring
Button
-
-
- - - - -
--
- - - - - - -
-- -
-----------;@
?'U~~ION
Advertisement
Table of Contents
