Page 1
4.3” Vision S Camera System Système de caméra Vision S de 4.3 po Sistema de cámara Vision S de 4.3” Instruction Manual Manuel d’instructions Manual de instrucciones * The packing contents may be different based on the kit you purchased. Please take the actual product as standard.
Welcome ® Thank you for purchasing this Furrion Vision S Camera System. Before operating your new product, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product. Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury.
Contents Welcome ....................2 Contents ....................3 Important Safety Instructions............4 FCC Statement ......................5 IC Statement ......................6 Product Overview ................7 Product Description ....................7 Monitor ........................7 Rear Camera ......................7 Installation ..................8 What’s in the Box ....................8 Monitor Installation....................8 Camera Installation ....................8 Electrical Connections ....................13 Getting Started ..................14 Activate the Monitor ....................14 Pairing the Camera and Monitor ................14...
Installation warranty. Furrion is not liable in full or in Installation and wiring of this product part for improper installation resulting require specialist skills. To ensure proper...
Important Safety Instructions NOTE: The Grantee is not responsible for any changes or modifications not expressly Electrical appliances and overhead power approved by the party responsible for lines can affect the wireless signal. compliance. Such modifications could Do not place the monitor in a location void the user’s authority to operate the where it might hinder field of vision while equipment.
Important Safety Instructions IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Product Overview Product Description The Furrion Vision S Camera System is designed to assist the driver by providing a clear and wide image of the area behind the vehicle whenever the vehicle is shifted into reverse. Never rely solely on this product to ensure the area is clear of children and/or obstructions. Use your monitor and look both ways.
Installation READ THIS MANUAL BEFORE INSTALLATION NOTE: We have included all of the items needed for most standard installations, but all vehicles are different. We recommend you review your vehicle completely before starting. What’s in the Box Fig. 1 Make sure you have the following items 4.
Page 9
Installation possible at the rear of the vehicle. Horizontal-center of the vehicle or as close as is optimal. Mount camera at least 2 inches above or below running lights. Close proximity to lights may cause image blooming, blurring and reduced night vision performance.
Page 10
Installation mounting and attach the cover. (Fig. 14) ” Fig. 11 Fig. 14 3. Feed the supplied 6-foot camera power 7. If a doorway camera is to be installed, cable through the gasket. Ensure the bare remove the Bracket Cover by unscrewing end of the cable goes into the vehicle and the four screws.
Page 11
(Fig. A traffic light must be installed together with the camera. For best performance, we recommend a Furrion traffic light is selected. 1. Select a suitable position on the back of the vehicle wall where you would like to install the camera.
Page 12
Installation Fig. 23 Fig. 26 4. Pull to remove the decorative part from traffic light and save in a safe place in case of future use. (Fig. 24) Fig. 27 7. Replace the lens cover over the traffic light base and press until a “click” is Fig.
Ensure correct polarity when wiring. Wire connections and terminals must be sealed and waterproof. The Furrion Vision S Camera System can be connected to an electrical power source via a 7 Way Connector. Wiring to running lights: the camera will...
Getting Started Pairing the Camera and Monitor The camera and monitor need to be paired the first time you are using your Vision S Camera System. button to highlight PAIRING NOTE: Ensure both the camera and monitor menu, then press to enter the next page.
Page 15
Getting Started 2. Once paired successfully, a red icon 3. An icon indicates pairing failed, repeat will appear after the device list. steps 2 and 3 to pair again. 4. Refer to “Camera Settings” section for detail settings of the camera.
Change Settings Camera Setting VOLUME SETTING 1. Use button to highlight VOLUME button to highlight SETUP menu, menu, then press to enter. then press to enter the next page or press button to return to the previous page. 2. Press to increase the volume or press to decrease.
Page 17
Change Settings the light detective function. MOTION DETECT SETTING The motion detect function is used to detect objects in motion and assist in safe driving while the vehicle is in reverse. When on, the monitor LCD will be illuminated automatically when motion is detected. 1.
Change Settings Picture Setting Software Version 1. Use button to highlight LCD AUTO button to highlight VERSION OFF menu, then press to enter. menu, then press to enter and view the current software version. 2. Use button to highlight BRIGHTNESS, CONTRAST or COLOR menu, then press to enter.
Operation Operating the System The Wireless Vehicle Rear Observation System operates when the vehicle is shifted into reverse. The Camera transmits a clear and wide image with Audio from the area Power/Confirm behind the vehicle to the monitor inside the vehicle.
Care and Cleaning Though your monitor requires little care, you will still need to maintain its condition and performance by following the guidelines below. Keep your system away from excessive moisture, extreme heat or cold. Keep liquids away from the display. Occasionally clean the surface of the monitor with a soft cloth moistened with water or glass cleaner.
Troubleshooting Problem Solution Check the power cable is connected. Monitor won’t turn on (no Check the cigarette lighter has 12-24V DC Output. blue LED) Check the fuse in the cigarette socket adapter. Check if the camera is receiving power. Camera & Monitor won’t pair Make sure to hold the camera pairing button for 2 seconds.
Warranty Furrion warrants for a period of 1 year from date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a Furrion authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials, and workmanship.
Page 24
DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF ANY EQUIPMENT OR PROPERTY, ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH FURRION PRODUCTS. FURRION’S TOTAL LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THIS PRODUCT PURSUANT TO THE TERMS OF THIS WARRANTY.
Page 25
Veuillez aussi remettre le présent manuel à tout nouveau propriétaire de cet appareil. Le fabricant décline toute responsabilité en cas de dommages dus au non-respect des présentes consignes. Si vous avez des questions sur nos produits, veuillez nous contacter : support@furrion.com...
Page 26
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.