Eclipse Security ECL-IP2D50 User Manual page 12

Motion Detect
Record Priority
Storage
Management
Wire Network
Network Protocol
Remote
Operation
Protocol
IR light
Power
Power
Consumption
Working
Temperature
Working
Humidify
Dimensions(mm)
Weight
Installation
Model
Parameter
Main Processor
OS
System
Resources
User Interface
System Status
Image Sensor
Pixel
Day/night
Gain Control
White Balance
BLC
Exposure Mode
Video
Compression
Standard
396 (18*22) detection zones; sensitivity level ranges from 0 to 100;
area threshold ranges from 0 to 100.
Activation event: video storage, image snapshot, log, email function
and etc.
Manual >Video detect>Schedule
NAS storage
1-ch 10/100 Base-T Ethernet
HTTP, TCP/IP, ARP,IGMP, ICMP, RTSP, RTP,UDP, RTCP, SMTP,
FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, QoS, 802.1x
Monitor, system setup, file download, log information, maintenance ,
upgrade and etc
PSIA, ONVIF
IR light 20M.
DC12V power and PoE.
Note:
05 series does not support PoE.
DC 12V 3.1W MAX
-30℃~+60℃
≤95%
Φ113.6×85.8
0.27kg
Ceiling and wall mount
High performance DSP
Embedded LINUX
Support real-time network, local record, and remote operation at the
same time.
Remote operation interface such as WEB, DSS, PSS
Bit stream statistics, log, and software version.
1/3-inch CMOS
1280(H)*960(V)
Support day/night mode switch
Fixed/Auto
Manual/Auto
On/Off
Manual/Auto/Low noise/Low motion blur
It ranges from 1/3 to 1/100000.
H.264/H.264H/MJPEG
DC 12V 3.6W MAX
2048(H)*1536(V)
7