General Chassis; Removing The Seat; Removing The Number Plate; Installing The Air Scoop - Yamaha YZ450FX 2022 Owner's Service Manual

EAM30016

REMOVING THE SEAT

TIP
The fuel tank cap cover and the seat are coupled
with each other with a plastic band.
When removing the seat, always remove the
fuel tank cap cover beforehand.
1. Remove:
• Fuel tank cap cover "1"
Refer to "FUEL TANK CAP" on page 1-23.
2. Remove:
• Seat "1"
EAM30371

REMOVING THE NUMBER PLATE

1. Remove:
• Bolt (number plate)
• Number plate "1"
TIP
• The projection "a" is inserted into the band of
the number plate. Pull the band off the projec-
tion before removal.
• Remove the clutch cable "2" from the cable
guide "b" on the number plate.
• The projection "c" on the lower bracket is in-
serted into the number plate. Remove the
number plate by pulling it off the projection.
• When installing the number plate, insert the
projection on the number plate into the hole in
the upper side of the band.
1
1
4-3

GENERAL CHASSIS

2
b
1
c
EAM30458

INSTALLING THE AIR SCOOP

1. Install:
• Air scoop (left "1"/right)
TIP
After inserting the projection "a" on the air scoop
(left/right) into the hole "b" in the air filter case, in-
serting the grooves "c" into the ribs "d" of the air
filter case, and inserting the projection "e" into
the slot "f" in the air filter case, install the air
scoop and secure it with the bolts.
f b
d d d
f f
a
a
a
c
e
1