Unitronics Vision OPLC V130-J-T2 Installation Manual page 7
Hide thumbs
Also See for Vision OPLC V130-J-T2:
- Installation manual (12 pages) ,
- User manual (20 pages) ,
- User manual (23 pages)
Advertisement
Vision™ OPLC™
pnp (source) Input
Input wiring
HSC input wiring
Shaft-encoder
Analog Input
Analog input wiring, current (2/3-wire)
Analog input wiring, current (4-wire), Voltage
Shields should be connected at the signal's source.
The 0V signal of the analog input must be connected to the controller's 0V.
Unitronics
7
Advertisement
