Table of Contents
Advertisement
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
1
Dell server chassis
1
2
Primary CMC
module
3
Switch installed in I/O module A1
4
I/O module B1
5
I/O module C1
3
6
Optional iKVM
1. CMC: Chassis Management Controller.
2. This module is optional.
3. iKVM: integrated keyboard video mouse.
Installation Warning Statements
Warning
Warning
Warning
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
OL-14317-01
7
8
9
10 Secondary CMC module
11 Fan modules
module
12 Power supplies
For more information about the components of the information panel, see the Dell
documentation at www.support.dell.com.
This section includes the basic installation warning statements. Translations of
these warning statements appear in the Regulatory Compliance and Safety
Information for the Cisco Catalyst Blade Switch 3000 Series for Dell document
that shipped with the switch.
To prevent the switch from overheating, do not operate it in an area that
exceeds the maximum recommended ambient temperature of 113°F (45°C). To
prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around
the ventilation openings. Statement 17B
Class 1 laser product. Statement 1008
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment. Statement 1030
I/O module C2
I/O module B2
I/O module A2
Installation Warning Statements
2
7
Advertisement
Table of Contents
