Installation Warning Statements - Cisco Catalyst 2960-S Started Manual

Catalyst 2960-S Switch Getting Started Guide

Installation Warning Statements

Warning
Warning
Warning
OL-19793-02
For 10/100 or 10/100/1000 fixed ports, cable lengths from the switch to
•
connected devices can be up to 328 feet (100 meters).
For cable lengths for small form-factor pluggable (SFP)-module connections,
•
see the hardware installation guide on Cisco.com and the documentation that
shipped with the module.
This section includes the basic installation warning statements. Translations of
these warning statements appear in the Regulatory Compliance and Safety
Information for the Catalyst 2960 and 2960-S Switches document on Cisco.com.
To prevent bodily injury when mounting or servicing this unit in a rack, you must
take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in the
rack.
When mounting this unit in a partially filled rack, load the rack from the bottom
to the top with the heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before
mounting or servicing the unit in the rack. Statement 1006
Class 1 laser product. Statement 1008
This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available. Statement 1024
Catalyst 2960-S Switch Getting Started Guide
19