Installation Warning Statements - Cisco Catalyst 3750 Getting Started Manual

Installation Warning Statements

This section includes the basic installation warning statements. Translations of these warning
statements appear in the Regulatory Compliance and Safety Information for the Catalyst 3750 Switch
document that shipped with the switch and is also available on Cisco.com.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this
equipment. Statement 148
Warning To prevent the switch from overheating, do not operate it in an area that exceeds the
maximum recommended ambient temperature of 113°F (45°C). To prevent airflow
restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings.
Statement 17B
Warning Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take
special precautions to ensure that the system remains stable. The following guidelines
are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with
the heaviest component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting or
servicing the unit in the rack.
Warning This equipment is intended to be grounded. Ensure that the host is connected to earth
ground during normal use. Statement 39
14
Statement 1006