Care And Maintenance - Dyna-Glo SEARPLUS DGF481CRN Assembly Instructions Manual

Care and Maintenance

Cooking Grates
hot from cooking, thus requiring less fuel to reach the necessary temperature for "burn-off."
To "burn off" or heat-clean your grill, turn the burners to highest position and run for 15 minutes with the
The porcelain grates have an enamel finish (similar to glass) and should be handled with care to help
prevent chipping.
Ensure the grill is cool and gas supply is turned off at the natural gas shut-off valve before
cleaning and conducting maintenance.
Recommended Cleaning Supplies
Mild liquid dish soap, warm water, nylon cleaning pad, wire brush
DO NOT use cleaners that contain acid, mineral spirits or any abrasive substance.
Outside Surfaces
It is recommended to use only mild dish soap and hot water to clean grill and grill parts.
Rinse with warm water.
Inside Bottom Pan of Grill Body
To clean, remove residue using a brush, scraper and/or cleaning pad. Wash with mild dish soap and
warm water. Rinse with warm water. Avoid water splashing into venturi tubes of burners.
Heat Tents
Clean residue with wire brush and wash with mild dish soap
and warm water. Rinse with warm water.
Grease Cup
Empty the grease cup and clean with mild dish soap and
warm water on a regular basis.
Checking The Flame
should be a blue-yellow color and be between 1- 2 inches high.
To check the flame, view the flame through the holes in both
CAUTION
22
Hole for viewing the flame